null
 Loading... Please wait...
  • Image 1

Nanoskin Seal Nano AIO Sealant 16oz

$49.95 $34.95
(You save $15.00)

or make 4 interest-free payments of fortnightly with Afterpay More info

Quantity:

Out of Stock

Product Description

• A paint sealant and swirl remover in one 
• Excellent for all paint types including gel coat 
• Advanced hydrophobic polymer

 

NANOSKIN® SEAL NANO is a synthetic paint sealant and swirl remover in one. This revolutionary new product combines the paint-correcting abilities of a polish with the durable protection of a nano paint sealant. Excellent for all paint types including gel coat, SEAL NANO provides relentless water beading and durable protection against UV rays, bug splatter, and anything else nature throws at your vehicle or boat on a daily basis. To achieve optimum result, apply NANOSKIN® SEAL NANO Perfect Sealant with MICROBUFF™ Finishing Pad to remove gloss-hindering defects while leaving a durable layer of hydrophobic protection behind.

 

DIRECTIONS:
For best results, use on clean, cool paint and out of direct sunlight.
Clean pad frequently using pad conditioner brush or compressed air using regulatory approved air nozzle.

 

 

 

Suggested Tools for Optimum Results-
FLEX XC 3401 VRG Dual Action Orbital Polisher
RUPES LHR 15ES Big Foot Random Orbital Polisher
RUPES LHR 21ES Big Foot Random Orbital Polisher

 

Removing 1,500 ~ 2,500 Grit Wet Sanding Marks-
1. Apply NANOSKIN® SPEED CUT Cutting Compound uniformly to 
MICROBUFF™ Cutting Pad. 
2. Buff at 4800 opm, working a 2’ x 2’ section.
3. Wipe residue off using a soft, clean microfiber towel.
4. Make your own choice for finishing:
A. Apply NANOSKIN® FORMULA 67 Professional Quick Detailer with 
MICROBUFF™ Polishing Pad to add a layer of wax and restore 
showroom gloss. (Speed 3800 opm)
B. Apply NANOSKIN® SEAL NANO Perfect Sealant with 
MICROBUFF™ Finishing Pad to remove gloss-hindering defects 
while leaving a durable layer of paint protection behind.
(Speed 3800 opm)

 

Removing 2,500 ~ 3,000 Grit Wet Sanding Marks or Finer scratches-
1. Apply NANOSKIN® NANO CUT Finishing Compound uniformly to 
MICROBUFF™ Cutting Pad. 
2. Buff at 4800 opm, working a 2’ x 2’ section.
3. Wipe residue off using a soft, clean microfiber towel.
4. Make your own choice for finishing:
A. Apply NANOSKIN® FORMULA 67 Professional 
Quick Detailer with MICROBUFF™ Polishing Pad to 
add a layer of wax and restore showroom gloss. 
(Speed 3800 opm)
B. Apply NANOSKIN® SEAL NANO Perfect Sealant 
with MICROBUFF™ Finishing Pad to remove 
gloss-hindering defects while leaving a durable layer 
of paint protection behind. (Speed 3800 opm)

 

NOTE: PAD REJUVENATION 
The heavy and quick cutting of some polishers can cause the surface to become very hot and cause the oils in the polishes/compounds to prematurely flash off. 
One fine mist of NANOSKIN PAD REJUVENATOR to the center of the used pad is enough lubrication to reactivate the polishes/compounds left on the pad and get it back to a serviceable condition. 
DO NOT APPLY MORE POLISHES/COMPOUNDS TO THE PAD until all excess compound is removed off the pad and the pad is completely lubricated then apply a quarter size (1” diameter or 2.5 cm.) amount of product to center of pad.
More compound IS NOT the answer. After spraying PAD REJUVENATOR on the pad, you will find you will be able to finish a section without any additional compounds. There was a commercial many years ago saying, “A little dab will do you” and that’s the way this system works.

 

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Find Similar Products by Category

Back to Top