Nanoskin SUPER-CHARGER SiO2 Touchless Spray & Rinse Sealant

• A water-activated spray-on-rinse-off sealant
• Fortified silica provides superior water beading
• Quicker alternative to wax your vehicle
• Prolongs the time in between waxes, polymer sealants and ceramic coatings

NANOSKIN ULTRA LINE, SUPER-CHARGER is an easy-to-use, water-activated SiO2 spray sealant that will allow you to receive the same protection you would expect from a wax in a fraction of the time! 
The most attractive feature of SUPER-CHARGER is its fast and simple spray-on-rinse-off application process. 
The fact that you don’t have to touch your car’s paint with anything in order to apply SUPER-CHARGER greatly cuts down on the risk of ruining your paint’s impeccable finish. 
All you need to do is spray SUPER-CHARGER on wet surface after you wash vehicle and then rinse it away with water. 

DILUTION: 
16 Oz. Ready-to-Use
1 Gal & above 100:1 

DIRECTIONS:
1. Dilute 1 part of product and 100 parts of water in a spray bottle. 
2. Thoroughly wash your car outside of direct sunlight to ensure the surface is cool to the touch.
3. While the surface is still wet and cool, work section by section and spray a light mist of diluted product directly onto the surface.
4. Immediately rinse the section with a strong jet of water.
5. You will notice the water-beading begin to take effect immediately.
6. Dry the surface off with clean towel or air blower tool to eliminate potential towel swirls left on the paint. 

NOTE: If you use too much product or if you let it dry, it may cause water spots or streaking. If this happens, simply rinse the car thoroughly again and dry it off.