A little “Woody” goes a long way! One ounce will treat a 25’ boat with 2 months protection. This concentrated wax will protect your decks and fiberglass from the deteriorating effects of the sun, oxidation, water spots, and pollution without the use of harsh chemicals or abrasive cleaners.
You will find washing becomes more like rinsing. Nothing sticks to your deck. With an easy swipe of a brush, even dried fish blood will come off with just water. Your boat will no longer have to go through the maintenance rollercoaster of detailing and deteriorating.
- Wash the boat and leave the deck wet.
- Spray Woody Wax on to a soft deck brush and brush onto the deck. As the wax hits the water, it will begin to bead and run towards the rear of the boat. Only re-spray the brush when you see wax stop coming off the brush. Continue application until completing the entire deck (or entire boat if desired).Use caution as decks and fiberglass will become slick until the surface is rinsed.
- After applying to the entire area go back to the starting point and re-brush the area just to be sure all the water is off. This re-brush spreads out any remaining water and evaporates it quickly, and also insures an even coat of wax over the entire area. (It should be dry of water and will now look and feel different than it did with the water on the deck). This re-brush is usually very quick and you shouldn't have to add any more Woody Wax unless your gel coat was extremely weathered.
- Starting with the bow, rinse the area you're standing on (if in bare feet you will feel the deck go from a little slick to very stiff under foot). At this point work your way towards the stern, rinsing the path in front of you so your feet don't pick up and reapply the wax to the already rinsed areas.
- After rinsing entire area and allowing a few minutes for most of the water to run off, use cotton towels to dry the boat. (The drying motion is doubling as a light buffing as you dry with the towels.)